Evaluation of internal and external doses from 11C produced in the air in high energy proton accelerator tunnels

Air has been irradiated with high energy protons at the 12 GeV proton synchrotron to obtain the following parameters essential for the internal dose evaluation from airborne 11C produced through nuclear spallation reactions: the abundance of gaseous and particulate 11C, chemical forms, and particle size distribution. It was found that more than 98% of 11C is present as gas and the rest is aerosol. The gaseous components were only 11CO and 11CO2, and their proportions were approximately 80% and 20%, respectively. The particulate 11C was found to be sulphate and/or nitrate aerosols having a log-normal size distribution; the measurement using a diffusion battery showed a geometric mean radius of 0.035 micron and a geometric standard deviation of 1.8 at a beam intensity of 6.8 x 10(11) proton.pulse-1 and an irradiation time of 9.6 min. By taking the chemical composition and particle size into account, effective doses both from internal and from external exposures per unit concentration of 11C were calculated for various room sizes. The values can be used to evaluate the effective dose from the airborne 11C produced in the accelerator tunnels.     

On one- and two-parameter analyses of short fatigue crack growth

Recent data on short fatigue crack growth in two cast and hot isostatically pressed (hipped) aluminum alloys obtained by Shyam, Allison and Jones have been analyzed in terms of a previously proposed one-parameter short crack model which includes consideration of elastic–plastic effects, the Kitagawa effect and the development of crack closure in the wake of a newly formed crack. The material constants obtained in a prior investigation of short crack growth behavior in a cast aluminum alloy tested under fully reversed loading were used as a basis for the present analysis. The predicted rates of fatigue crack propagation are in accord with the experimental results. In the discussion, aspects of the two-parameter approach presented by Shyam et al. are compared with those of the one-parameter method of analysis used herein.     

Channel Thickness Dependence of the Magnetic Properties in (Ga,Mn)As FET Structures

We have fabricated a series of field-effect transistor structures with a thin (Ga,Mn)As channel with thickness t of 3.5, 4.0, 4.5, and 5.0 nm, and investigated the effect of electric-field E on their magnetic properties. The Curie temperature T _C showed a clear dependence on the magnitude of E, and its controllable range became larger with decreasing t and reached 15 K for the device with t=3.5 nm, which corresponded to 32% of T _C of the layer.     

Breakdown Characteristics of N2O Gas Mixtures for Quasiuniform Electric Field under Lightning Impulse Voltage

From the viewpoint of mitigating global warming by SF₆ gas, this paper discusses breakdown (BD) characteristics of different electronegative gas mixtures with N₂O gas as SF₆ gas substitutes for quasi-uniform electric field under lightning impulse voltage applications. Experimental results revealed the positive synergism in breakdown strength of binary N₂O / CO₂ and ternary N₂O / CO₂ / O₂ gas mixtures, respectively. Furthermore, N₂ gas as a retardant gas was also mixed with the electronegative gas mixtures in order to reduce the electron energy into the effective levels of electron attachment ability by the electronegative gas mixtures. As the result, ternary N₂O / CO₂ / N₂ and quaternary N₂O / CO₂ / O₂ / N₂ gas mixtures could exhibit the significant synergistic effect in breakdown strength. The optimum mixture rate of quaternary N₂O / CO₂ / O₂ / N₂ gas mixtures was consistent with that estimated by assuming the independent contribution of component gases to the improvement of impulse BD characteristics.     

Forecasting electric power generation in a photovoltaic power system for an energy network

Recently, there has been an increase in concern about the global environment. Interest is growing in developing an energy network by which new energy systems such as photovoltaic and fuel cells generate power locally and electrical power and heat are controlled with a communication network. We developed the power generation forecast method for photovoltaic power systems in an energy network. The method makes use of weather information and regression analysis. We carried out forecasting power output of the photovoltaic power system installed in Expo 2005, Aichi Japan. As a result of comparing measurements with prediction values, the average prediction error per day was about 26% of the measured power. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(4): 16–23, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20755     

Synthesis of novel organocobalt poly(arylene-vinylene)s containing (cyclobutadiene)cobalt moieties in the main chain

Summary Organocobalt poly(arylene-vinylene)s composed of 1,2- or 1,3- linkage at their cyclobutadiene moieties (3 and 4, respectively) were prepared by the Heck reaction of p-divinylbenzene with (cyclobutadiene)cobalt-containing monomers having two aryl bromide moieties (1 and 2, respectively). The number average molecular weights (M _n) of the obtained organocobalt poly(arylene-vinylene)s (3 and 4) were 4,100 and 4,000, respectively (GPC, on the basis of polystyrene). UV-vis spectra of 3 and 4 exhibited main π-π^* absorption peaks at 362 and 397 nm, respectively, which were ca. 60 nm bathochromically shifted from those of the corresponding monomeric units. Both polymers were found to show thermotropic liquid crystallinity in the range of room temperature to ca. 80 °C by employing differential scanning calorimetry (DSC) and the optical measurement using crossed polarizers. Received: 2 July 1999/Accepted: 29 July 1999     

Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation

This paper presents a technique to differentially diagnose two types of localized gear tooth faults: a spall and a crack in the gear tooth fillet region. These faults could have very different prognoses, but existing diagnostic techniques only detect the presence of localized tooth faults without being able to differentiate between a spall and a crack. The effects of spalls and cracks on the behaviour of gear assemblies were studied using static and dynamic simulation models. Changes in the kinematics of a pair of meshing gears due to a gear tooth fillet crack (TFC) and a tooth flank spall were compared using a static analysis model. The difference in the variation of the transmission error (TE) caused by the two faults reveals their characteristics. The effect of a tooth crack depends on the change in stiffness of the tooth while the effect of a spall is dominantly determined by the geometry of the fault. A technique has previously been proposed to detect spalls [M. EL Badaoui, J. Antoni, F. Guillet, J. Daniere, Use of the moving cepstrum integral to detect and localize tooth spalls in gears, Mechanical System and Signal Processing, 15 (5) (2001) 873–885; M. EL Badaoui, V. Cahouet, F. Guillet, J. Daniere P. Velex, Modelling and detection of localized tooth defects in geared systems, Transaction of ASME, 123 (2001) 422–430], using the cepstrum to detect a negative echo in the signal (from entry into and exit from the spall) and successfully performed differential diagnosis on the simulated vibration signals. While the result of the experimental study showed some differences from the result of the simulation study, the differential diagnosis was successfully performed based on the technique presented in this paper. Further investigation revealed non-linear gearmesh behaviour which was causing differences in the experimental and simulation model results.     

In vitro selection of aptamers that bind to ribosome-inactivating toxins

Ribosome-inactivating proteins, such as ricin, pepocin and gypsophilin, catalyze the hydrolysis of a single N-glycosidic bond at a specific position in rRNAs. Aptamers targeting pepocin were selected from a random sequence RNA pool that spanned 30 positions. After 8 rounds, the anti-pepocin aptamers were sequenced and a conserved hairpin motif was identified. Interestingly, the selected motif is quite different from the toxin-binding domains of rRNAs.